Laboratory Investigation on the Effect of Height, Density and Arrangement of Artificial Roughness Elements on Manning Roughness Coefficient

Document Type : Research Paper

Authors

Abstract

Determination of flow resistance is an essential parameter for studying and hydraulic analysis
of the open channels. Manning roughness coefficient is often be used for description flow resistance
or relative roughness of a channel or floodplain. This research was focused on the effect of the
height, density and arrangement of the artificial cubic roughness elements on Manning roughness
coefficient. In total 48 experiments were conducted with three values of roughness height
(5,10 and 15 mm), two percentages of roughness density (25% and 50%), two types of roughness
arrangement (regular and staggered patterns), four flow discharge values on rough bed and four
experiments with smooth bed in a laboratory flume. A length of 3.7 meter of the flum bed was
designed as the rough bed according to the experiments plan. The results showed that the influence
of the roughness arrangement on changing the value of Manning roughness coefficient (n) is more
than the influence of the height and density of roughness. Also the mean value of Manning
coefficient increased from 0.009 in smooth bed to 0.0132 in regular pattern and 0.0175 in staggered
pattern. At last in order to compare with the results of previous works, some relationships have been
offered in order to estimate the Darcy-weisbach coefficient (f) on the basis of the roughness density
percentage at the bottom (C), relative submergence ( y ks ), Froude number of flow ( Fr ) and a factor
related to roughness arrangement(€).

Keywords

Main Subjects


منابع مورداستفاده
بهرامی م و شفاعی بجستان م، 1389. مطالعه آزمایشگاهی اثر رسوبات درشت دانه کف کانال بر ضریب مقاومت جریان. مجله دانش آب و خاک، جلد 20، شماره 2،  صفحه­های 143 تا 156.
تدین فر ح و فغفور مغربی م، 1388.  اثر توزیع المان­های زبری بر ضریب زبری مانینگ. صفحه­های 169تا178. هشتمین سمینار بین المللی مهندسی رودخانه، 8-6 بهمن، دانشگاه شهید چمران اهواز، اهواز.
شفاعی بجستان م، 1387. مبانی نظری و عملی هیدرولیک انتقال رسوب. اهواز، انتشارات دانشگاه شهیدچمران، چاپ اول،  ویرایش دوم، صفحه 551.
محمودیان شوشتری م، 1385. اصول جریان در مجاری باز. اهواز، انتشارات دانشگاه شهید چمران، جلد اول، چاپ اول، صفحه 486.
Bathurst JC, 1985. Flow resistance estimation in mountain rivers. Journal of Hydraulics Engineering 111: 625-641.
Chow VT, 1959. Open channel hydraulics. McGraw-Hill Book Company, NewYork, NY.
Christodoulou GC, Kostidou E and Vassilakos P, 2013. Resistance to flow over submerged obstacles in a steep Channel. Pp.632-644. Proceedings 2nd European IAHR Congress. 27-29 June, Munich, Germany.
Coloseus HJ, 1962. Discussion of roughness spacing in rigid open channels. Journal of the Hydraulics Division
 88:194-199.
Herbich JB and Shulits S, 1964. Large-scale roughness in open-channel flow.  Journal of Hydraulic Division
 90(6): 203-230.
Huthoff F, 2012. Theory for flow resistance caused by submerged roughness elements.  Journal of   Hydraulic           Research 50(1):10-17.
Ibrahim MM and Abdel-Mageed NB, 2014. Effect of bed roughness on flow characteristics. International Journal     of Academic Research 6(5):169-178.
O'Loughlin A and Macdonald EG 1964. Some roughness concentration effects on boundry resistance. La Houille Blanche 7: 777-782. 
 Sayre W and Albertson ML, 1961. Roughness spacing in rigid open channels. Journal of Hydraulics Division,       87:121-150.
Schroder RCM, 1990. Hydraulic methods of roughness determination.  DVWK Schriften, 92, Verlag paul parey,    Humburg-Berlin, Germany.
Yang SQ, Han Y and Dharmasiri N, 2011. Flow resistance over fixed roughness elements. Journal of Hydraulic Engineering ASCE 49(2): 257-262.
Yen BC, 2002. Open channel flow resistance. Journal of Hydraulic Engineering AS