@article { author = {}, title = {Laboratory Investigation on the Effect of Spur Dike Permeability on the Scour Hole Dimensions}, journal = {Water and Soil Science}, volume = {24}, number = {3}, pages = {27-40}, year = {2014}, publisher = {University of Tabriz}, issn = {2008-5133}, eissn = {2717-3755}, doi = {}, abstract = {Spur dike use is one of the most common structural methods for improvement and bank protection in river engineering. This structure is generally built across the river from the bank towards centerline in order to protect the banks from erosion and to increase sedimentation along the protected banks. However, the scour hole around the nose of the structure is formed due to reducing flow width and increasing velocity and shear stress. In order to investigate the effect of permeability of spur dikes on scour hole dimensions, experiments were carried out in a laboratory flume with 7.3m length, 0.56m width and 0.6m depth. Four quantities of permeability including 0% (impermeable), 30%, 40% and 50% with four Froude numbers at constant flow depth (0.15m) were conducted and all experiments were carried out with clear water. of the bed sediments was equal to 0.7mm. Dimensional analysis was applied to produce the related non-dimensional parameters and by using the measured data and regression analysis a few equations for estimating scour hole dimensions were developed. The results showed that with increasing Froude number the scour hole dimensions increased up to 1.5 times (in non permeable condition). The maximum scour hole depth increased up to 4 times, whereas the spur dike permeability decreased from 50% to 0%. The scour hole dimensions for the first and second spur dikes were also decreased by increasing the spur dike permeability.  }, keywords = {Froude Number,Group of spur dikes,Permeable spur dike,Scour hole}, title_fa = {بررسی آزمایشگاهی تاثیر نفوذپذ یری آبشکن روی ابعاد چاله فرسایشی}, abstract_fa = {یکی از روش‌های متداول در ساماندهی و کنترل فرسایش کناری رودخانه‌ها استفاده از آبشکن‌ها می‌باشد. آبشکن‌ها سازه‌های متقاطع یا عرضی هستند که از دیواره رودخانه به سمت محور مرکزی آن کشیده می‌شوند. این سازه هر چند با هدف رسوب‌گذاری و جلوگیری از فرسایش کناره‌ها و حواشی رودخانه ایجاد می‌شوند اما به دلیل  کاهش عرض مقطع جریان و در نتیجه افزایش سرعت و تنش برشی در دماغه آبشکن، باعث ایجاد حفره فرسایشی در اطراف آن می‌گردند. به منظور بررسی اثر نفوذپذیری آبشکن بر ابعاد چاله فرسایشی، آزمایش‌هایی در یک فلوم آزمایشگاهی به طول 3/7 متر، عرض 56/0 متر و ارتفاع 6/0 متر از جنس پلکسی گلاس انجام شد. در این تحقیق با استفاده از دو نوع آبشکن نفوذناپذیر و نفوذپذیر با سه درصد نفوذپذیری 30%٬ 40%  و 50%  برای چهار عدد فرود جریان و با عمق ثابت 15/0 متر، ابعاد چاله فرسایشی در شرایط آب زلال مورد آزمایش قرار گرفت. برای رسوبات بستر نیز از ماسه طبیعی با دانه‌بندی یکنواختmm 7/0  استفاده شد. با استفاده از آنالیز ابعادی عوامل بی‌‌بعد استخراج و با انجام مطالعات آزمایشگاهی و برازش رگرسیونی بر داده‌های بدست آمده، رابطه‌هایی برای تخمین ابعاد چاله آبشستگی ارائه شد. نتایج این تحقیق نشان داد با افزایش عدد فرود جریان، ابعاد چاله فرسایشی به میزان بیش از 5/1 برابر(در حالت نفوذناپذیر) افزایش و با کاهش نفوذپذیری از 50 درصد تا صفر درصد، حداکثر عمق چاله فرسایشی  به میزان بیش از 4 برابر افزایش پیدا کرد. همچنین با افزایش نفوذپذیری، ابعاد چاله آبشستگی اطراف دو ردیف اول و دوم آبشکن‌ها کاهش یافت.      }, keywords_fa = {آبشکن نفوذپذیر,چاله فرسایشی,سری آبشکنها,عدد فرود}, url = {https://water-soil.tabrizu.ac.ir/article_2804.html}, eprint = {https://water-soil.tabrizu.ac.ir/article_2804_bd94837c69bdd52f6c887f92d77a980d.pdf} }